302 You need at least %1!d! byte(s) of free space on the disk.
303 The archive with the specified name (%1!s!) already exists on the disk [are you sure you replaced the disk?]. Please insert a blank disk and click Retry or click Cancel to abort.
304 To avoid possible data loss, would you like to finish processing the current file (%1!s!) before aborting? If you choose Yes, PowerZip will stop after processing the current file. If you click No, compression will be aborted immediately but the Zip file may be unusable / corrupted.
305 There was an error performing the action.
306 Cannot extract one of the files (%1!s!). The file appears to be corrupt.
307 The following error has occurred:\n%1!s!
308 The archive appears to be damaged or corrupt. If you have downloaded the file from the Internet, please download the file again or contact the vendor of the file.
309 Internal Error 1010!
310 Internal Error 1011!
315 Internal Error 1016 (%1!d!, %2!d!)!
400 Cannot create archive: make sure that the file name is valid, that you have the necessary access permissions and that the disk is not read-only or write-protected!
401 The file does not appear to be a valid archive.
402 Cannot find archive - it may have been renamed or deleted!
403 The disk is full!
404 Access denied: the archive is read-only!
405 \nWould you like to continue processing other files (if any)?
406 Cannot open file - another user has it locked open!
407 Cannot open one of the files. Would you like to continue?
408 Cannot delete one of the files - you do not have correct permissions. Would you like to continue?
409 At least one of the files is corrupt. Would you like to continue?
415 Cannot extract file "%1!s!" - the file name is not valid! Would you like to continue processing other files (if any)?
416 One of the files (%1!s!) is compressed using an unknown compression method.
417 The maximum number of split / multi-disk Zip file volumes (99) has been exceeded. If you are creating a split (multi-part) Zip file, please increase the maximum size of each part in the Options step of the Compression Wizard.
418 One of the file names (%1!s!) is too long. The file will be skipped.
420 Cannot open archive.
421 Cannot create one or more of the files being extracted. Would you like to continue?
423 One of the files (%1!s!) is too big to be processed.
424 Cannot open archive!
425 Error reading the archive!
426 Cannot write the file being extracted. Would you like to continue?
428 The self-extractor is corrupt. Please re-install PowerZip.
429 One of the files in the archive spans multiple volumes. Please insert the disk with the next volume and click Retry.
430 Cannot create directory '%1!s!'. Would you like to continue?
431 Cannot open one of the files.
432 Error opening archive: '%1!s! is not a valid %2!s! file.
433 Cannot open "%1!s!" - the file no longer exists! Would you like to continue processing other files (if any)?
434 Error opening archive: '%1!s!' has been created with an unsupported version of %2!s!.
435 Error writing to the destination file!
436 Error opening archive: '%1!s! is not the next archive in the multi-disk archive set!
437 Cannot overwrite '%1!s!' - you do not have the correct permissions.\n\n- Click Retry to try overwriting this file again\n- Click Ignore to skip this file\n- Click Abort to abort extraction
438 Error reading one of or more of the files chosen for compression.
439 Cannot create a temporary file!
441 Cannot create archive! Please make sure that the file name is valid, that the disk is not write-protected or read-only and that you have the appropriate access permissions.
442 Error compressing data!
443 Cannot create the destination directory!
444 PowerZip requires an external program called Arj.exe to handle Arj files. Please specify the path to Arj.exe in the Locations tab of the Settings dialog box.\n\nFor more information on getting and installing Arj.exe, please read the "External Programs" topic in the PowerZip User Guide.
445 Cannot execute the external program required to complete this operation. Please ensure that the path you specified in the Program Locations tab of the Settings dialog box is correct.\n\nFor more information on getting and installing Arj.exe, please read the "External Programs" section of the PowerZip Online Help.
446 The archive might be corrupt. Would you like to continue opening the archive?
447 Cannot create file: %1!s!\n\nWould you like to continue extracting files?
448 The archive appears to be corrupt. The following file will be truncated: %1!s!\n\nWould you like to continue extracting files?
449 Cannot create the file: %1!s!
452 Error: cannot write to the output file!
453 PowerZip requires an external program called Ha.exe to handle Ha files. Please specify the path to Ha.exe in the Locations tab of the Settings dialog box.\n\nFor more information on getting and installing Ha.exe, please read the "External Programs" topic in the PowerZip User Guide.
454 PowerZip requires an external program called Lha.exe to handle Lzh files. Please specify the path to Lha.exe in the Program Locations tab of the Settings dialog box.\n\nFor more information on getting and installing Lha.exe, please read the "External Programs" section of the PowerZip User Guide.
460 Cannot create self-extracting archive: make sure that the file name is valid and that you have the appropriate access permissions!
461 \n\n- To abort the operation, click Abort\n- To try again, click Retry\n- To skip the current file, click Ignore
1000 PowerZip requires a newer version of comctl32.dll. A new version of this file has been installed with PowerZip, however, it appears that the version that is installed on your computer at the moment is older. Please re-install PowerZip.
1001 The encryption password was not correctly confirmed. Please ensure that the encryption password is exactly the same as the confirmation password.
1002 Out of memory!
1003 Cannot create folder. Please ensure that you have the appropriate permissions and that the disk isn't full or write-protected.
1200 Zip is the most common archive format. Zip files can span multiple disks, and provide both compression and file grouping. PowerZip does not use external programs to work with Zip files.
1201 ARJ is an older format that provides both file grouping and compression. PowerZip requires an external program (Arj.exe) to create and extract Arj archives. Please see the "External Programs" section in PowerZip Online Help for more information.
1202 Cab (short for Cabinet) format is used by many setup programs, including those used to install Windows 95, 98 and NT. CAB files provide both file compression and file grouping. PowerZip does not use external programs when working with CAB files.
1203 To add files to an existing archive, open this archive in PowerZip and then use the Compression Wizard
1204 Once a Cab, Tar/Gz or a multi-disk Zip archive is created, you cannot add more files to it. In addition, PowerZip cannot create or add files to Ace, Lzh, Z and Rar archives.
1205 Unknown extension: %s. PowerZip cannot create archives of this type.
1206 The passwords you typed do not match. Please enter the desired password in the password box and then confirm the password by re-entering it in the confirmation box.
1207 The archive '%1!s!' already exists. Would you like to replace the existing archive?\n\nNOTE: If you would like to avoid replacing the archive, please click No and type a different archive name.
1208 Self-Extracting Zip (SFX) is an executable program file (.EXE file) that includes a Zip file and software to extract it. Users can run a Self-Extracting Zip file just as they run any other program.
1209 Ha is a relatively new archive format that provides both file grouping and compression. PowerZip requires an external program (Ha.exe) to create and extract Ha archives. Please see the "External Programs" section in PowerZip Online Help for more information.
1210 Please specify the file name of the archive you wish to create!
1501 You will need to restart PowerZip in order for this option to take effect.
1502 Wizard
1503 Self-Extracting Archives (*.exe)|*.exe||
1504 Convert to Self-Extracting Archive
1505 OK
1506 The current archive was successfully converted into a self-extracting archive (%1!s!).
1507 The destination folder (or archive) already contains a file named '%1!s!'.
1508 %1!d! bytes\nmodified on %2!s!
1509 %B %d %Y %H:%M
1510 archive
1511 folder
1512 '%1!s!'
1513 Some of the files in the archive are password protected. Please enter password for:\n%1!s!
1514 Please remove the current disk and label it as disk #%1!d!. Insert a new disk and click OK to continue.
1515 Please insert %1!s! and press OK to continue.
1516 the last disk in the set
1517 disk #%1!d!
1518 Cannot delete "%1!s!". Please ensure that the disk is not write-protected and that you have the appropriate access permissions.
1519 Current file:
1520 The file does not appear to be a valid archive.\n\nIf it is a part of a multi-disk archive set, please insert %1!s! and press OK; otherwise press Cancel.
1521 Cannot delete '%1!s!'.\n\n- Click Retry to try deleting this file again\n- Click Ignore to skip this file\n- Click Abort to abort deleting all temporary files and folders
1522 Cannot delete '%1!s!'.\n\n- Click Retry to try deleting this folder again\n- Click Ignore to skip this folder\n- Click Abort to abort deleting all temporary files and folders
1523 PowerZip couldn't delete all temporary files because they were in use. Some files were left in '%1!s!'. You should delete these files manually when you finish using them.
1524 Cannot delete '%1!s!'.\n\n- Click Retry to try deleting this file again\n- Click Ignore to skip this file\n- Click Abort to abort deleting the files
1525 Cannot create folder: %1!s!
1526 Verdana
1527 12
1528 PowerZip will extract the files into a folder of your choice
1529 Destination Folder
1530 You can choose which files to extract and whether to extract folders
1534 You have chosen to extract all files that match a wildcard. Please specify a non-empty wildcard you want PowerZip to match files against e.g. "*.doc" or "??1999.*" (please don't include the quotation marks). To extract all files in the archive, please select the appropriate option in the Extract Files section of this dialog box.
1535 Please select files and/or folders you want PowerZip to compress
1536 Files to Compress
1537 Please choose how you want PowerZip to compress the files
1538 Compression Options
1539 Please indicate whether you would like to create a new archive
1541 Archive
1542 Please select the name and type of the archive you would like to create
1543 New Archive
1546 Self-Extracting Archive Properties
1547 Create
1548 Look in:
1549 Archive type:
1550 Archive name:
1551 Create a new archive
1552 None
1553 Exclamation
1554 Information
1555 Question
1556 Stop
1557 PowerZip currently isn't associated with archives. This is one of PowerZip's most useful features - if PowerZip is associated with archives, double-clicking on an archive in Windows Explorer will open that archive using PowerZip.\n\nWould you like to associate archives with PowerZip?\n\n[You can specify which archives to associate with PowerZip using the Settings dialog box]
1589 Please tick the files and folders that you want PowerZip to compress. You can select items in multiple folders. If you choose to compress a folder, its contents will also be compressed. So far, you have selected %1!d! item(s) to be compressed.
1590 PowerZip can store either complete, partial or no folder names. For example, for a file C:\MyFolder\MySubFolder\MyFile.txt, PowerZip will store the file either as MyFile.txt (no folder names), MyFolder\MySubFolder\MyFile.txt
1591 (full folder names) or MySubFolder\MyFile.txt (partial folder names with C:\MyFolder as the Virtual Root). HA archives only support full folder names.
1592 Cannot create a new folder. Please ensure that the drive is not read-only or write-protected and that you have sufficient access permissions to create a new folder in this location.
1593 Please wait...
1594 All Archives|
1595 The text you have entered is not a valid PowerZip Product Key.\n\n- Please Do Not try to type in the Product Key - always copy & paste it (see instructions above the Product Key box).\n\n- When you are copying the Product Key, please make sure that nothing else other than the Product Key is highlighted. When correctly copied & pasted, the Product Key in the box should look like this:\n\nXXXXXXXXXX - XXXXXXXXXX - XXXXXXXXXX\nXXXXXXXXXX - XXXXXXXXXX - XXXXXXXXXX\n\nIf you still have trouble entering the Product Key, please contact us by visiting www.powerzip.biz/support.aspx\n\nThank you for choosing PowerZip!
1596 The PowerZip Product Key you have entered appears to be designed for a newer version of PowerZip (the version you are using is v7.0). To download the newest version, please visit www.powerzip.biz\n\nIf you believe this message to be an error, please contact us on support@tridentsw.com
1597 Thank you very much for registering PowerZip!\n\nYour name should now appear in the About Box (Help -> About PowerZip).\n\nPlease remember to keep your Product Key secure and confidential. If you lose your Product Key, please contact us.
1598 You cannot create an archive in the folder you specified. Please choose another location.
1599 For help, please place your mouse over the control you want to see information about. A tool tip with information will appear after a short while.
1600 The file '%1!s!' does not appear to be a valid archive. PowerZip does not support archives of type '%2!s!'.
1601 If you would like to add files to an existing archive other than the currently open archive:
1602 If you would like to add files to an existing archive:
1603 An error has occurred! Would you like PowerZip to generate an automatic bug report and send it to Trident Software?\n\nNOTE: The report will contain:\n- Information about the error\n- Information about the version of PowerZip you are using\n- The name and version of the operating system you are using
1604 PowerZip will now exit due to the fatal error.
1605 One of the files required by PowerZip (PZRes.dll) is missing. Please re-install PowerZip.
1606 Archive To Extract
1607 Please choose whether to extract the open archive or select another archive
1608 Select Archives
1609 Please select the archive(s) you would like to extract
1610 Order Type
1611 Please choose whether you wish to use our web site or an offline form
1612 Contact Details
1613 Please enter your contact details
1614 Credit Card Details
1615 Please enter your credit card details
1616 Buy PowerZip Wizard
1617 Buy Later [%1!d!]
1618 Buy Later
1619 Add files to archive, prompt to replace existing files
1620 Move files to archive
1621 Update existing files, do not add new files
1622 Update existing files, add new files if necessary
1623 Error reading the archive file '%1!s!' - the file may be inaccessible or it may be locked by another application.
1624 The cab file you are extracting is part a of multi-file set. However, the next cab in the set (%1!s!) is not present in the same folder as the cab file being extracted (%2!s!) or could not be opened for reading.\n\n- To continue extracting files, please make sure %1!s! is in the folder above and is not in use and click Retry.\n- Otherwise, click Cancel to abort
1625 The cab file you are extracting is part a of multi-file set. However, the next cab in the set (%1!s!) is either corrupt or is not a valid cab file. Extraction will abort.
1626 The part size must be greater then or equal to 40.
1627 The next cab file in the multi-part (split) archive PowerZip is creating will be called %1!s!. However, a file with this name already exists in the folder where the multi-part archive is being created (%2!s!).\n\n- To overwrite the file, click Ignore\n- Otherwise, remove or rename the existing file and click Retry\n- Click Abort to cancel
1628 The name of one of the files being compressed (%1!s!) is too long to be stored in a Tar archive. Would you like to skip this file?\n\n- Click Yes to skip the file and continue compressing other files\n- Click No to cancel the operation
1629 The Zip file you are trying to unzip appears to be a split Zip file, probably created by WinZip. Split Zip files use a proprietary extension to the official Zip standard and are not supported by PowerZip.\n\nPlease ask the vendor of the Zip file to send it in a standard format (e.g. as multi-part Cab file).
1630 Your Product Key has been revoked. The most likely reason is that you requested a refund after purchasing PowerZip. If you believe this message to be an error, please contact us by visiting www.powerzip.biz/support.aspx
1631 The Zip file you are extracting is part a of multi-file set. However, the next file in the set (%1!s!) is not present in the same folder as the Zip file being extracted (%2!s!) or could not be opened for reading.
1632 Higher compression (Deflate64)
1633 Maximum compression (BWT)
1634 The Zip file cannot be converted to a Self-Extracting archive (EXE) because it contains one or more files compressed with a method not supported by PowerZip Self-Extractor such as Deflate64 or BWT. If you have created the Zip yourself, please create it again choosing a lower compression level (no more than High).
1635 In order to avoid showing the Please Buy screen in the future, PowerZip needs to save the Product Key in the file '%1!s!'. However, PowerZip is unable to create the file (or if the file already exists, unable to overwrite the existing file). Please make sure that you have write permissions for the file.\n\nClick Retry to try saving the Product Key again or Cancel not to save the Product Key.
1636 One of the files required by PowerZip (%1!s!) is missing or corrupt. You will need to re-install PowerZip. To reinstall:\n\n1. Uninstall PowerZip via Add/Remove Programs in the Control Panel\n2. If you no longer have the PowerZip Setup download, please download it again from www.powerzip.biz/download.aspx\n3. Run the setup download (PowerZipSetup.exe) to install PowerZip\n\nIf you have any questions please contact us by visiting www.powerzip.biz/support.aspx
1637 One of ActiveX components required by PowerZip has become unregistered. This may happen if you re-install Windows after installing PowerZip or restore an old backup of the registry.\n\nPowerZip is unable to re-register the component, probably because you are not logged in as a user with sufficient access privileges. Please log in as an Administrator and run PowerZip again to attempt to re-register the component.\n\nIf you have any questions please contact us by visiting www.powerzip.biz/support.aspx
1638 Files matching the following wildcards will be added to the archive. Please include the full path with the wildcard (e.g. C:\Temp\*.doc)
1639 Files matching the following wildcards will NOT be added to the archive, even if they are ticked. Please DON'T include any path with the wildcard (e.g. *.doc).
1640 The name of one of the files being compressed (%1!s!) is too large to be stored in a Tar archive (a file stored in a Tar archive cannot be larger than 8Gb). Would you like to skip this file?\n\n- Click Yes to skip the file and continue processing other files\n- Click No to cancel the operation
1642 OK
1643 The multi-part option is only supported when creating a new Zip or Cab archive. To use this option please go back and select Zip or Cab as the archive type. Cab archives are a Microsoft standard; they can be opened natively under recent versions of Windows and are supported by most archive programs.
1644 BWT and Deflate64 compression methods while providing high levels of compression may not be compatible with older versions of PowerZip and with other Zip programs. If you choose to use this compression setting, you may not be able to unzip the resulting Zip file in programs other than PowerZip.\n\nAre you sure you wish to use this compression setting?
1646 <p><b><font color="maroon">To use the free trial version</font></b>:<br>- Click Buy Later (disabled after 45 days)</p><p><b><font color="maroon">To purchase PowerZip</font></b>:<br>- Click Buy PowerZip</p><p><b><font color="maroon">If you have already purchased PowerZip</font></b>:<br>- Click Enter Product Key</p>
1647 <p><b>Purchasing Information</b><br>The cost of one PowerZip license is <b>$24*</b> (US Dollars). This is a one-off fee and includes <font color="#C00000">free</font> upgrades and <font color="#C00000">free</font> technical support.
1648 <font color="green"><b>100% Satisfaction Money-Back Guarantee</b></font><br>If you are not fully satisfied with PowerZip for any reason, <a href="http://www.powerzip.biz/support.aspx"><font color="blue">contact us</font></a> within 45 days from the date of purchase and we will promptly refund your payment in full.
1649 This is a free, fully-functional trial version of PowerZip 7.0. You can use this trial version for up to 45 days. To continue using PowerZip after the trial period expires, you must purchase a license.
1650 <p><font size="2">* Excludes residents of Australia and the European Union. Australian and EU residents - please see the <a href="https://www.tridentsw.com/powerzip/sec/buy.aspx?Build=3847&Version=7.01"><font color="blue">order form</font></a> for pricing.</font></p>
1651 <b>How to enter the Product Key</b>:<br>1. Locate the Product Key in the Product Key e-mail (or the Order Confirmation page)<br>2. Highlight the two lines of the Product Key; make sure nothing else is highlighted<br>3. Press Ctrl+C (press c while holding down Ctrl) to copy the Key to the clipboard<br>4. Switch back to PowerZip and click Paste; the Key should appear in the box below<br>5. Click OK
1652 <font color="maroon"><B>Important Notes</b>:<br></font>1. Please <font color="maroon"><b><i>do not</i></b></font> try to type-in the Product Key. <font color="maroon"><i><b>Always</b></i></font> copy & paste the Product Key by following the instructions above<br><font size="1"> </font><br>2. If you purchased PowerZip <b>on CD-ROM</b>, please note that the Activation Key number printed on the back of the CD case is <font color="maroon"><i><b>not</b></i></font> your Product Key. You need to follow the activation instructions printed below the Activation Key sticker. <br><br><b>Lost your Product Key?</b> Please visit <a href="http://www.powerzip.biz/lostkey.aspx"><font color="blue">www.powerzip.biz/lostkey.aspx</font></a>
1653 <B>Please enter your PowerZip Product Key in the box below</b><br><font size="2"> (the Product Key is provided when you <a href="https://www.tridentsw.com/powerzip/sec/buy.aspx?Build=3847&Version=7.01"><font color="blue">purchase PowerZip</font></a>)</font>
1654 The password you specified was not the correct password for '%1!s!'. The file was not extracted.
1655 Cannot overwrite '%1!s!'.
61457 PowerZip's online help system requires Internet Explorer 4.0 or greater. You do not appear to have Internet Explorer or higher installed. To view the PowerZip User Guide, we recommend you install the latest version of Internet Explorer.\n\nTo download Internet Explorer, please visit www.microsoft.com/ie/\n\nNOTE: If you believe this message to be in error, please contact us by visiting www.powerzip.biz/support.aspx
